Oilfield Service Alloy B / UNS N10001 ASTM Standard Nickel Alloy Pipe With Annealed & Pickling Surface
| Item | Description | |
| Basic Information | Material Grade | UNS N10001, UNS N10665, N06625, N06600, N06601,N07718, N10276, N08800, N08825, N04400; etc |
| Outer Diameter | 17.1mm-219.1mm | |
| Wall Thickness | 1.65mm-20.00mm | |
| Length | Normally fixed length 6m, can as per customer’s requirement | |
| Standard | ASTM B163; ASTM B167; ASTM B444; ASTM B622 etc | |
| Process Method | Cold Drawn or Cold Rolled | |
| Industry & Advantage | Application | Equipment handling reducing chemical environments; and chemical process industry involving hydrochloric, sulfuric, phosphoric and acetic acids |
| Advantages | Alloy B has excellent resistance to reducing environments like sulfuric acid at moderate concentrations and other nonoxidizing acids. It also resists stress corrosion cracking induced by chlorides. Alloy B has poor resistance to oxidizing environments, therefore, it should not be used where ferric or cupric salts are present as these salts may cause rapid corrosion failure. | |
Alloy B Chemical Composition:
% | Ni | Mo | Fe | Co | Cr | C | Mn | Si | P | S | V |
min | balance | 26 | 4 | 0.2 | |||||||
max | 30 | 6 | 2.5 | 1 | 0.05 | 1 | 1 | 0.04 | 0.03 | 0.4 |
Alloy B Physical Properties:
| Density | 9.24 g/cm3 |
| Melting range | 1330-1380℃ |