Nickel 200/ UNS N02200 reines Nickellegierblatt/ Platte für die Luft- und Raumfahrt
Grad: Alloy 200/UNS N 02200, Alloy 625 /N06625 , Alloy 600 /N06600 ,Alloy 601 /N06601 , Alloy 718 /N07718, Alloy C276 /N10276 , Alloy 800 /N08000 , Alloy 825 /N08825 , Alloy 400 /N04400,etc
Oberfläche: Bright Annealed
Technologie: Cold Rolled
Ndt: Ultrasonic test; Penetrant Test
Inspektion: 100%
Verpackung: Pallet/Plywooden case
Qualitätssicherung: ISO & PED
Blatt | Platte | Streifen | |
Dicke | ＜ 6mm | ≥ 6 mm | 0,15 mm - 3mm |
WiDTH | ≤ 1200 mm | ≤2800 mm | ≤ 1000 mm |
LEngles | ≤ 3000 mm | ≤ 8000 mm | Als Kundenanforderung |
Nickel 200 Chemische Zusammensetzung
% | Ni | Fe | C | Mn | Si | S | Cu |
99 | |||||||
Max | 0.4 | 0.15 | 0.35 | 0.35 | 0.01 | 0.25 |
Nickel 200 Physische Eigenschaften
Dichte | 8,89 g/cm3 |
Schmelzbereich | 1435-1446℃ |
Merkmale: Nickel 200 is commercially pure wrought nickel. It is highly resistant to various reducing chemicals. It can also be used in oxidizing conditions that cause the formation of a passive oxide film, for instance its unexcelled resistance to caustic alkalis. Nickel 200 is limited to service at temperatures below 315℃, because at higher temperatures it suffers from graphitization which results in severely compromised properties. In that circumstance, Nickel 201 is used instead. It has a high Curie temperature and good magnetostrictive properties. Its thermal and electrical conductivities are higher than nickel alloys.