Alloy C276

Alloy C276 (UNS N10276) is a kind of nickel molybdenum chromium iron tungsten alloy, which is one of the most commonly used corrosion-resistant materials. It is used in various environments from moderate oxidation to strong reduction.

Alloy C276 has excellent resistance to sulfuric acid and hydrochloric acid, acidic chloride, formic acid and acetic acid, wet chlorine, hypochlorite and chlorine solution due to its high content of nickel, chromium and molybdenum.

Alloy C276

It has excellent resistance to pitting corrosion, crevice corrosion and stress corrosion cracking. Like many other nickel alloys, it is malleable and easy to form and weld. This alloy is used in most industrial environments where corrosive chemical environments exist and other alloys fail.

Chemical composition:

% Ni Cr Mo Fe W Co C Mn Si P S V
min balance 20.0 12.5 2.0 2.5
max 22.5 14.5 6.0 3.5 2.5 0.015 0.50 0.08 0.020 0.020 0.35

Physical properties :

Density 8.69 g/cm3
Melting range 1325-1370℃

Application:

Pressure vessel

Scrubber

damper

Heat exchanger

Pumps and valves

Flue gas desulfurization system

Evaporator and delivery piping

Pulp and paper industry

waste disposal

Sulfuric acid condenser

Pharmaceutical industry

From

UNS

Alloy

Scope (mm)

Seamless pipe &tube

Welded pipe & tube

Fitting/Flange

Sheet, Plate, Strip

UNS N10276

ALLOY C276

OD: 4.5-355mm
WT: 1.65-11.13mm
L: 0-12000mm
OD: 17.1-914.4mm
WT: 1-36mm
L: <12000mm
DN15-DN600 Plate: WT<6mm, WDT<1200mm, L<3000mm;

WT>6mm, WDT<2800mm, L<8000mm
Coil: WT:0.15-3MM, WDT: <1000mm